Features: Modular plasma/TIG welding machine with Comfort 2.0 P control Plasma and TIG welding Plasma and pulsed TIG welding Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc Plasma and TIG welding current adjustable in 0.1 A increments Pilot arc current adjustable in 0.1 A increments between 2–15 A The pilot arc current can be adjusted at four operating points during the welding process (beforehand, during, and following welding, as well as during pauses in welding) Non-latched/latched operation Spot welding/tack function (spotArc/spotmatic) Spotmatic – reduce the time required for tacking by up to 50% (TIG only) Adjustable up-slope and down-slope time Adjustable gas pre- and post-flow time Temperature, flow and pressure monitoring for the coolant circuit All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine Integrated gas metering unit in the connection box Non-interchangeable connections for all mediums Welding torch connection using quick connect coupling Connection capability for remote control Two system bus connections (e.g. for ewm Xnet) Set-up with Trolly 55-6 and Cool 50 MPW50; alternatively, a separate recooling unit can be used No additional mains connection required for Cool 50 MPW50, the Cool unit is supplied with mains voltage via the power source Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains supply lead with 16 A shock-proof plug Please always use an electrode setting gauge to achieve optimum welding results
