The plasma cutter offered by vigor
welding is fast accurate and is of high-quality product that can maintain the
quality reliability and accuracy of the client’s cutting process.
Following are key features of Vigor Cutting
Systems’ or vigor welding machine:
Modular plasma/TIG welding
machine with Comfort 2.0 P control
Plasma and TIG welding
Plasma and pulsed TIG
welding
Plasma and pulsed TIG
welding up to the kHz range allow a high welding speed with minimal heat input
using a constricted arc
Plasma and TIG welding
current adjustable in 0.1 A increments
Pilot arc current adjustable
in 0.1 A increments between 2–15 A
The pilot arc current can
be adjusted at four operating points during the welding process (beforehand,
during, and following welding, as well as during pauses in welding)
Non-latched/latched
operation
Spot welding/tack function
Spot-matic – reduce the
time required for tacking by up to 50% (TIG only)
Adjustable up-slope and
down-slope time
Adjustable gas pre- and
post-flow time
Temperature, flow and
pressure monitoring for the coolant circuit
All control elements and
connections for welding torches, remote controls and work piece leads are
directly accessible on the front of the machine
Integrated gas metering
unit in the connection box
Non-interchangeable
connections for all mediums
Welding torch connection
using quick connect coupling
Connection capability for
remote control
Two system bus
connections.
3.5 m mains supply lead
with 16 A shock-proof plug
Product Details:
Model Name/Number
Microplasma 25
Voltage
220 V
Frequency
50 Hz / 60 Hz
Weight
33.6 kg
Dimension
625 x 377 x 531 mm
Brand
EWM
Mains Fuses Current
1 x 10 A
Mains Voltage
1 x 230 V (-40 % - +15 %)
Efficiency
88 %
Dimensions
625 x 377 x 531 mm
EMC Class
A
Insulation Class
H
Protection Class
IP23
Tank Capacity
5 L
Flow Rate
5 l/min
Max Pressure
3.5 Bar
Features: Modular plasma/TIG welding machine with Comfort 2.0 P control Plasma and TIG welding Plasma and pulsed TIG welding Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc Plasma and TIG welding current adjustable in 0.1 A increments Pilot arc current adjustable in 0.1 A increments between 2–15 A The pilot arc current can be adjusted at four operating points during the welding process (beforehand, during, and following welding, as well as during pauses in welding) Non-latched/latched operation Spot welding/tack function (spotArc/spotmatic) Spotmatic – reduce the time required for tacking by up to 50% (TIG only) Adjustable up-slope and down-slope time Adjustable gas pre- and post-flow time Temperature, flow and pressure monitoring for the coolant circuit All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine Integrated gas metering unit in the connection box Non-interchangeable connections for all mediums Welding torch connection using quick connect coupling Connection capability for remote control Two system bus connections (e.g. for ewm Xnet) Set-up with Trolly 55-6 and Cool 50 MPW50; alternatively, a separate recooling unit can be used No additional mains connection required for Cool 50 MPW50, the Cool unit is supplied with mains voltage via the power source Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains supply lead with 16 A shock-proof plug Please always use an electrode setting gauge to achieve optimum welding results
.jpg)
.jpg)
